Equipment: Heat transfer through composite wall
Specifications:-
1. Heater: Nichrome heater wound on mica former and insulation with control unit capacity 300 watt maximum.
2. Heater Control Unit: 0-230V. Ammeter 0-2Amps. Single phase dimmerstat (1No.).
3. Temperature Indicator (digital type): 0-200oC. Service required – A. C. single phase 230 V. earthed electric supply
Equipment: Thermal conductivity of insulating powder
To determine total thermal conductivity of insulating powder
Specifications:-
1. Heater: Nichrome heater wound on mica former and insulation with control unit capacity 300 watt maximum.
2. Heater Control Unit : 0-230V. Ammeter 0-2Amps. Single phase dimmerstat (1No.).
3. Temperature Indicator (digital type): 0-200oC. Service required – A. C. single phase 230 V. earthed electric supply.
4. Radius of the inner copper sphere, ri = 50mm
5. Radius of the outer copper sphere, ro = 100mm
6. dimmerstat 0 – 2A, 0 – 230 V. Insulating Powder – Asbestos magnesia commercially available powder and packed between the two spheres.
Equipment: Heat transfer from PIN-FIN apparatus
To determine heat transfer coefficient in natural and forced convection for Pin Fin.
Specifications:-
1. Heater : Nichrome heater wound on mica former and insulation with control unit capacity 300 watt maximum.
2. Heater Control Unit : 0-230V. Ammeter 0-2Amps. Single phase dimmerstat (1No.).
3. Temperature Indicator (digital type): 0-200oC. Service required – A. C. single phase 230 V. earthed electric supply.
4. Duct size= 150*100 mm. Diameter of the fin 12.7 mm, Diameter of orifice=18 mm,
5. Centrifugal Blower 1 HP single-phase motor
Equipment: Emissivity measurement apparatus
To determine emissivity of non black plate.
Specifications:-
1. Heater : Nichrome heater wound on mica former and insulation with control unit capacity 300 watt maximum.
2. Heater Control Unit : 0-230V. Ammeter 0-2Amps. Single phase dimmerstat (1No.).
3. Temperature Indicator (digital type): 0-200oC. Service required – A. C. single phase 230 V. earthed electric supply.
4. Test plate Dia=165 mm, Black plate Dia=165 mm,
5. Enclosure size = 580mm x 300mm x 300mm wooden.
Equipment: Stefan Boltzmann's apparatus
To determine emissivity of non black plate.
Specifications:-
1. Heater : Nichrome heater wound on mica former and insulation with control unit capacity 300 watt maximum.
2. Heater Control Unit : 0-230V. Ammeter 0-2Amps. Single phase dimmerstat (1No.).
3. Temperature Indicator (digital type): 0-200oC. Service required – A. C. single phase 230 V. earthed electric supply.
4. Hemispherical enclosure= 200 mm
5. Base plate, bakelite diameter=240 mm
6. Test disc diameter = 25 mm.
7. Mass of test disc=0.005 kg
8. Specific heat, S of the test disc= 0.41868Kj/Kg.- 0C In SI unit)
Keys and Bearings
Types of Couplings
Types of Brake
Types of Drives
Petrol and Diesel 2,4 Stroke Engine
Water Tube Boiler
Fire Tube Boiler
Types of Gears
Integrated Hydraulic Trainer
Specification:-
1. 02 Double acting cylinder.
2. Manifold (P Type and T Type)
3. 02 No. Pressure gauge.
4. 4/3 Valve 4/2 Valve.
5. Hydraulic Accumulator.
Gear Pump Test Rig
Specification:-
1. A. 1 phase 2 wire static energy meter.
2. B. 1 Hp Motor.
3. C. Ball Type Valve.
4. D. Sump Tank.
Integrated Pneumatic Trainer
Specification:-
1. Single Acting and Double acting cylinder
2. 2 Pressure gauges.
3. 3/2 Valve, 5/2 Valve.
4. Rotary Actuators.
5. Hydraulic Accumulator.
Floating Carriage Micrometer
Specifications:-
1) L x W x H: Approx. 350mm x 150mmx 140mm
2) List count of micrometer: 0.0002 mm
3) Diameter of the micrometer drums 100mm
4) Dial type Fiducial Indicator with 0.01mm standard dial.
5) Admit between centers 200 mm
6) Max Diameter capacity 100mm
Optical Profile Projector
Specifications:-
1) 250 mm Optical Profile Projector
2) Resolution: - 50X
3) Least count 1 micron, 50 X 50 mm stage